OLED Display 24VDC Clamp On Water Flow Meter

OLED Display 24VDC Clamp On Water Flow Meter

I INTRODUCTION

ML-F8 is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation.It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.

ML-F8 is widely used in the production process for flow measurement and monitoring. The application of the product continuously and effectively controls the flow of the fluid, so as to improve the yield of the product and even save the input of the personnel, bringing benefits to the production enterprise.

II. SPECIFICATION

Model: ML-F8

Velocity Range: 0.1 m/s ~ 5.0 m/s

Accuracy: ± 2.0%

Repeatability: 0.80%

Pipe Size: DN15,DN20,DN25,DN32,DN40,DN50

Data Storage: Daily, Monthly, Yearly Totalizer

Analog output: 4~20mA, Maximum load: 600Ω

Alarm output: OCT, Upper and lower limit alarm function (for option)

Communication: RS485,support Modbus communication protocol

Power Supply: 24VDC

Cable Length: 1.8m

Keypad: Four light touch buttons

Screen: OLED 128*64 screen display

Units: Metric and imperial units are available

Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA Gallons(GAL)/min
Default unit setting: m3/h

Totalizer: Six bit digit

Piper Material: Stainless steel pipe, carbon steel pipe, PVC

Case Material: Aluminum alloy

Environment Temp.:0℃-50℃

Medium Temp.:0℃-50℃

Environment Humidity: 0-95% relative humidity, without condensation

IP Grade: IP54

III. PIPE SPECIFICATION

IV. INSTALLATION STEPS

fixed ultrasonic flow meter

insertion type ultrasonic flow meter

OLED Display 24VDC Clamp On Water Flow Meter Images